Anderson Metals Brass Hose Fitting, Union, 3/4″ x 3/4″ Barb

#ad
Anderson Metals 07014-12 #ad - This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included.

Connects to a hose on both ends. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. This anderson metals union coupling is made of brass and connects two hoses with the same diameter in a straight run. They are made of brass, pressure, stainless steel, galvanized steel, and other materials that resist corrosion, and wear.

Anderson Metals Brass Hose Fitting, Union, 3/4" x 3/4" Barb #ad - Hose fittings have various types of connections, barbed, including threaded, dry disconnect, push-to-connect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, firefighting, mining, road construction, and tire installation in industries including agriculture, and aviation.

Anderson metals manufactures brass fittings, valves, and pipe nipples. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The company, is headquartered in Kansas City, founded in 1951, MO.

#ad



Gates 28474 90 Degrees Molded Heater Hose

#ad
Gates 28474 #ad - By pass hose gates heater hose - 90° molded 28474 3/4" x 4" x 6" ONE PER PKG 28474.

#ad



PRO 1 Heater Hose 3/4 Inch Inside Diameter X 6 Feet Length 052615C

#ad
Thermoid #ad - Withstands the abuse of corrosive solutions and additives. Flexible and can be used for Cars, Tractors, Trucks, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit.

Made by pro 1 in the usa resists weathering to provide long, trouble free service life OEM Gates heater hose - 90° molded 28474 3/4" x 4" x 6" ONE PER PKG 28474.

#ad



EDGE INDUSTRIAL 3/4" X 5/8" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1

#ad
EDGE INDUSTRIAL #ad - Please review our attached npt sizing chart to cross reference npt thread size to linear inches Gates heater hose - 90° molded 28474 3/4" x 4" x 6" ONE PER PKG 28474. Withstands the abuse of corrosive solutions and additives. Not for use with potable water. 40° to 160° temperature Rating. Not deemed lead free.

3/4" x 5/8" brass barb Splicer Reducer Fitting. 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA. 150 psi maximum working pressure. Backed by edGE Industrial full manufacturers warranty. 3/4" x 5/8" brass barb Splicer Reducer Fitting. Not for potable water. Not deemed lead free. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit.

EDGE INDUSTRIAL 3/4" X 5/8" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1 #ad - 150 psi maximum working pressure. Please note: npt thread size is NOT determined by its outside thread diameter in inches. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. 40° to 160° temperature rating.

#ad



Dixon 179-1212 Brass Hose Splicer Fitting, Tee, 3/4" Hose ID Barbed

#ad
Dixon Valve & Coupling 179-1212 #ad - Connects to a hose on all ends. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Withstands the abuse of corrosive solutions and additives. Forged brass for greater strength than cast brass. Tee for connecting and branching three hoses. This dixon 179 series tee hose fitting is made of forged brass and connects and branches three hoses.

They are made of brass, stainless steel, and other materials that resist corrosion, pressure, galvanized steel, and wear. Not deemed lead free. The company, is headquartered in Chestertown, founded in 1916, MD. Backed by edGE Industrial full manufacturers warranty. 150 psi maximum working pressure. Hose fittings have various types of connections, including threaded, dry disconnect, barbed, push-to-connect, and others including those based on internationally-accepted specifications.

Dixon 179-1212 Brass Hose Splicer Fitting, Tee, 3/4" Hose ID Barbed #ad - 3/4" x 5/8" brass barb Splicer Reducer Fitting. This tee fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule not included. Not for potable water. Flexible and can be used for Cars, Tractors, Trucks, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover.

#ad



Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 12, 11/16" to 1-1/4" Diameter Range, 1/2" Bandwidth Pack of 10

#ad
NOSLP 62012H #ad - Fits pipe and hose. Withstands the abuse of corrosive solutions and additives. This is easy to use and easy to install. Backed by edGE Industrial full manufacturers warranty. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. This product is high quality product and highly durable. Tee for connecting and branching three hoses.

Not for potable water. Barbed fitting for a tight seal on hoses. United states. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This product is manufactured in United States. For use in standard clamp applications. 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA.

Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 12, 11/16" to 1-1/4" Diameter Range, 1/2" Bandwidth Pack of 10 #ad - Gates heater hose - 90° molded 28474 3/4" x 4" x 6" ONE PER PKG 28474. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. Connects to a hose on all ends. 150 psi maximum working pressure. 40° to 160° temperature Rating.

#ad



Dixon BM8 Brass Hose Fitting, Mender, 1" Hose ID Barbed

#ad
Dixon Valve & Coupling BM8 #ad - Hose mender for repairing hoses. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Withstands the abuse of corrosive solutions and additives. 3/4" x 5/8" brass barb Splicer Reducer Fitting. For use with a hose clamp, crimp sleeve, or ferrule sold separately. Barbed fitting for a tight seal on hoses.

Not deemed lead free. Gates heater hose - 90° molded 28474 3/4" x 4" x 6" ONE PER PKG 28474. Forged brass for greater strength than cast brass. Barbed fitting for a tight seal on hoses. 40° to 160° temperature Rating. They are made of brass, galvanized steel, stainless steel, and other materials that resist corrosion, pressure, and wear.

Dixon BM8 Brass Hose Fitting, Mender, 1" Hose ID Barbed #ad - 150 psi maximum working pressure. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Not for potable water. This dixon bm series mender hose fitting is made of brass and is suitable for repairing a broken hose. Connects to a hose on all ends. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines.

#ad



Anderson Metals Brass Garden Hose Swivel Fitting, Connector, 3/4" Barb x 3/4" Female Hose

#ad
Anderson Metals 07046-1212 #ad - This coupling has female garden hose threads GHT for connecting to a male GHT connector. Withstands the abuse of corrosive solutions and additives. Connects to a hose on both ends. Forged brass for greater strength than cast brass. 40° to 160° temperature Rating. The barbed stem creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included.

United states. Not for potable water. This product is easy to use and easy to install. This anderson metals swivel garden hose connector is made of brass and connects hose to a male GHT connector. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA.

Anderson Metals Brass Garden Hose Swivel Fitting, Connector, 3/4" Barb x 3/4" Female Hose #ad - Adapter for connecting hose or fittings of different types. Connects to a hose on all ends. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Hose fittings have various types of connections, barbed, dry disconnect, push-to-connect, including threaded, and others including those based on internationally-accepted specifications.

Flexible and can be used for Cars, Tractors, Trucks, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover.

#ad



Gates 28466 90 Degreees Molded Heater Hose

#ad
Gates 28466 #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. 150 psi maximum working pressure. Barbed fitting for a tight seal on hoses. United states. Barbed fitting for a tight seal on hoses.

For use in standard clamp applications. And its territories. Gates heater hose - 90° molded 28466 5/8" x 4" x 6" ONE PER PKG 28466. Not for potable water. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 3/4" x 5/8" brass barb Splicer Reducer Fitting. Backed by edGE Industrial full manufacturers warranty.

Gates 28466 90 Degreees Molded Heater Hose #ad - Fits pipe and hose. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Not deemed lead free. Tee for connecting and branching three hoses. 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA.

#ad



Gates 28412 3/4" X50FT Safety Stripe Heater Hose Standard

#ad
Gates 28412 #ad - Connects to a hose on all ends. This product is easy to use and easy to install. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Gates heater hose - safety stripe 28412 3/4" x 50' Safety Stripe ONE PER PKG 28412. Adapter for connecting hose or fittings of different types.

Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Not deemed lead free. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barbed fitting for a tight seal on hoses. By pass hose gates heater hose - 90° molded 28474 3/4" x 4" x 6" ONE PER PKG 28474.

Gates 28412 3/4" X50FT Safety Stripe Heater Hose Standard #ad - Tee for connecting and branching three hoses. Barbed fitting for a tight seal on hoses. Forged brass for greater strength than cast brass. 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines.

Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover.

#ad



HPS HTSEC90-075-BLK Silicone High Temperature 4-ply Reinforced 90 degree Elbow Coupler Hose, 100 PSI Maximum Pressure, 4" Leg Length on each side, 3/4" ID, Black

#ad
HPS Silicone Hoses HTSEC90-075-BLK #ad - 150 psi maximum working pressure. 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA. Backed by edGE Industrial full manufacturers warranty. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Not deemed lead free. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Silicone hose is not compatible with fuel or oil; Inside Diameter: 3/4. Hps 3/4 inch 19 millimeter 4-ply reinforced high temperature 90 degree elbow coupler Silicone Hose Black features 4-ply reinforced and knitted premium polyester fabric with high temperature silicone rubber, for which meet or exceed SAEJ20 Standard and is engineered for extreme temperature and various pressure ranges where high performance levels are required.

HPS HTSEC90-075-BLK Silicone High Temperature 4-ply Reinforced 90 degree Elbow Coupler Hose, 100 PSI Maximum Pressure, 4" Leg Length on each side, 3/4" ID, Black #ad - And its territories. Gates heater hose - 90° molded 28466 5/8" x 4" x 6" ONE PER PKG 28466. Hose mender for repairing hoses. Hps silicone hoses are used by professionals in industries such as high performance racing vehicles, turbo diesel, commercial truck and bus, Marine, food and beverage, agricultural and off highway vehicles, and general manufacturing industries.

Connects to hose on one end and a male GHT threaded connection on the other. Silicone hose is not compatible with fuel or oil. Connects to a hose on both ends.

#ad