Banjo HB125-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1-1/4″ NPT Male x 1-1/4″ Barbed

#ad
Banjo Corporation HB125-90 #ad - Hose fittings have various types of connections, push-to-connect, including threaded, dry disconnect, barbed, and others including those based on internationally-accepted specifications. The barbed connection creates a tight seal on a tube or hose, and the male National Pipe Taper NPT threaded end connects with a female NPT threaded connection.

Maximum working pressure of 150 psi at 70 degrees F. This schedule 80 elbow is made of glass-reinforced polypropylene for rigidity, and resistance to high impact, heat, dimensional stability, lightweight, corrosion, and most chemicals. The company, is headquartered in Crawfordsville, founded in 1995, IN.

Hose fittings are used in systems such as air compressors, road construction, automatic manufacturing operations, and tire installation in industries including agriculture, firefighting, aircraft controls, mining, and aviation. Banjo manufactures valves, couplings, pipe and hose fittings, pumps, and other fluid handling products for industrial applications.

Banjo HB125-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1-1/4" NPT Male x 1-1/4" Barbed #ad - . They are made of brass, stainless steel, and other materials that resist corrosion, pressure, galvanized steel, and wear.90-degree elbow for connecting tubing to a threaded connection at an angle. This barbed hose elbow is suitable for use in agricultural and industrial systems for liquid flow applications.

Hose fittings connect, change the direction of, control, and terminate the flow in piping and hose systems.

#ad



Banjo TF125 Polypropylene Bulkhead Tank Fitting, 1-1/4" NPT Female

#ad
Banjo Corporation TF125 #ad - Temp. Connection type fnpt x fnpt, Required Hole Size 2-1/4 In. Gasket material EPDM, Max. Bulkhead tank fitting, body Material Polypropylene, Pipe Size 1-1/4 In. Pressure 150 psi, Length 3/4 In. Range -20 degrees to 150 degrees f, Color Black Requires a 2-1/4" hole in bulkhead.

#ad



Seawater Strainer 1-1/4 inch

#ad
SHERWOOD 18016 #ad - Full flow filtering with ultra low pressure differential Easy in-line cleaning Durable non-corrosive construction Quick clear bowl examination Lightweight with optional mounting bracket Stainless steel screens Optional bracket available Sherwood 14238. Sherwood 18016, she18016. Requires a 2-1/4" hole in bulkhead.

#ad



Banjo HB100-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1" NPT Male x 1" Barbed

#ad
Banjo Corporation HB100-90 #ad - This barbed hose elbow is suitable for use in agricultural and industrial systems for liquid flow applications. Hose fittings connect, change the direction of, control, and terminate the flow in piping and hose systems. The company, is headquartered in Crawfordsville, founded in 1995, IN. Requires a 2-1/4" hole in bulkhead.

Sherwood 18016, she18016. Hose fittings are used in systems such as air compressors, and tire installation in industries including agriculture, mining, automatic manufacturing operations, aircraft controls, road construction, firefighting, and aviation. Banjo manufactures valves, pumps, couplings, pipe and hose fittings, and other fluid handling products for industrial applications.

Banjo HB100-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1" NPT Male x 1" Barbed #ad - Maximum working pressure of 150 psi at 70 degrees F. Hose fittings have various types of connections, push-to-connect, dry disconnect, barbed, including threaded, and others including those based on internationally-accepted specifications. They are made of brass, and other materials that resist corrosion, pressure, galvanized steel, stainless steel, and wear.

This schedule 80 elbow is made of glass-reinforced polypropylene for rigidity, corrosion, and resistance to high impact, lightweight, dimensional stability, heat, and most chemicals. The integral 1-3/8"hex nut provides a gripping surface for a wrench when tightening the fitting. The maximum working pressure for this fitting is 150 pounds per square inch psi at 70 degrees F.

This banjo hb100-90 barbed hose 90-degree elbow is made of glass-reinforced polypropylene and has a 1" barbed connection on one end and a 1" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection at a 90-degree angle to change the direction of flow.

#ad



Lifegard Aquatics 3/4-Inch Double Threaded Bulkhead

#ad
Lifegard Aquatics 3/4" Double #ad - Heavy wall bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium. Custom installations are easier and safer with all parts included in this convenient 3/4-inch Double Threaded Bulkhead. All kits contain: bulkhead fitting, gasket, lock nut.

Connects a hose on one end and a female NPT threaded connection on the other. Glass-reinforced polypropylene for rigidity, and resistance to heat, most chemicals, corrosion, lightweight, dimensional stability, and high impact. Integral hex nut for using a wrench to tighten the fitting. Sherwood 18016, she18016.

Lifegard Aquatics 3/4-Inch Double Threaded Bulkhead #ad - Stock color is jet black to match acrylic tank backgrounds. Requires a 2-1/4" hole in bulkhead. Maximum working pressure of 150 psi at 70 degrees F. 90-degree elbow for connecting tubing to a threaded connection at an angle.

#ad



Oatey Mystic Rainwater Collection System Fits 2" X 3" Residential Downspouts

#ad
Oatey 14209 #ad - Maximum working pressure of 150 psi at 70 degrees F. Requires a 2-1/4" hole in bulkhead. The mystic is easily installed and will fit on a standard 2'' by 3'' residential downspout. 90-degree elbow for connecting tubing to a threaded connection at an angle. Heavy wall bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium.

Glass-reinforced polypropylene for rigidity, corrosion, lightweight, and resistance to heat, dimensional stability, most chemicals, and high impact. Integral hex nut for using a wrench to tighten the fitting. Step by step instructions are included along with a 4' high flow hose to connect the diverter to the collection container.

Oatey Mystic Rainwater Collection System Fits 2" X 3" Residential Downspouts #ad - Comes with 4 ft. All kits contain: bulkhead fitting, gasket, lock nut. Stock color is jet black to match acrylic tank backgrounds. Directs rainwater from downspouts into collection barrels for re-use in lawn/garden watering. Fits standard 2" x 3" residential downspouts. The 2 piece design is made of durable, UV resistant material and can be painted to match the downspout color.

Oatey 14209 mystic rainwater collection systemThe Mystic rainwater collection system is used to recycle rainwater by directing rainwater from downspouts into collection barrels not included for re use in lawn and garden watering.

#ad



Sierra 1-1/4 Inch x 6-1/4 Foot 116-250-1141 Shields Shieldsflex II Water/Exhaust Hose with Wire-1-1/4 X 6-1/4"

#ad
Sierra 116-250-1141 #ad - Sherwood 18016, she18016. Designed to give excellent service for: straight pipe connector Less than 4 x I. Maximum working pressure of 150 psi at 70 degrees F. The temperature ranges from -20° F ¬ +200°F continuous, +250°F intermittent. Can be bent into Gradual Radius: Flexibility 2. It is reinforced with wire helix imbedded between plies of HD synthetic cord.

Glass-reinforced polypropylene for rigidity, corrosion, and resistance to heat, most chemicals, lightweight, dimensional stability, and high impact. Integral hex nut for using a wrench to tighten the fitting. All kits contain: bulkhead fitting, gasket, lock nut. Two-piece design is made of UV-Resistant PVC plastic and can be painted.

Sierra 1-1/4 Inch x 6-1/4 Foot 116-250-1141 Shields Shieldsflex II Water/Exhaust Hose with Wire-1-1/4 X 6-1/4" #ad - Shieldsflex ii marine Water/Exhaust Hose has a black synthetic rubber tube and cover. Comes with 4 ft. This hose is abrasion and odor permeation resistant. Stock color is jet black to match acrylic tank backgrounds. It is resistant to exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. Connects a hose on one end and a female NPT threaded connection on the other.

Shieldsflex ii is primarily used for engine intake, bilge pump intake/discharge, wet exhaust connections use where bends or long lengths are required, toilet intake/discharge, scupper lines, and holding tank vent/pump out.

#ad



Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 24, 1-1/16" to 2" Diameter Range, 1/2" Bandwidth Pack of 10

#ad
NOSLP 62024H #ad - Requires a 2-1/4" hole in bulkhead. Comes with 4 ft. Maximum working pressure of 150 psi at 70 degrees F. Directs rainwater from downspouts into collection barrels for re-use in lawn/garden watering. All kits contain: bulkhead fitting, gasket, lock nut. Sherwood 18016, she18016. Heavy wall bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium.

United states. Fits standard 2" x 3" residential downspouts. This is easy to use and easy to install. Two-piece design is made of UV-Resistant PVC plastic and can be painted. This product is manufactured in United States. Double the ozone resistance required by the SAEJ2006. The hose meets sae J2006 Type R2 standards.

Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 24, 1-1/16" to 2" Diameter Range, 1/2" Bandwidth Pack of 10 #ad - This product is high quality product and highly durable. This product is easy to use and easy to install. Designed to give excellent service for: straight pipe connector Less than 4 x I. Glass-reinforced polypropylene for rigidity, corrosion, and resistance to heat, lightweight, most chemicals, dimensional stability, and high impact.

Integral hex nut for using a wrench to tighten the fitting.

#ad



Banjo SL125-90 Polypropylene Pipe Fitting, 90 Degree Street Elbow, Schedule 80, 1-1/4" NPT Female x NPT Male

#ad
Banjo Corporation SL125-90 #ad - All kits contain: bulkhead fitting, gasket, lock nut. Fits pipe and hose. Product can give good service with proper installation, may not be suitable in all Applications: Severe Bend. United states. The npt threads create a tighter seal than straight threads. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance.

Designed to give excellent service for: straight pipe connector Less than 4 x I. Requires a 2-1/4" hole in bulkhead. Glass-reinforced polypropylene for rigidity, dimensional stability, and resistance to heat, most chemicals, corrosion, lightweight, and high impact. Integral hex nut for using a wrench to tighten the fitting.

Banjo SL125-90 Polypropylene Pipe Fitting, 90 Degree Street Elbow, Schedule 80, 1-1/4" NPT Female x NPT Male #ad - When purchasing pipe fittings, as this will affect material type, size, shape, consider the application, and required durability. Handles pressures up to 150 psi at 70 degrees F. Connects a hose on one end and a female NPT threaded connection on the other. Double the ozone resistance required by the SAEJ2006.

The hose meets sae J2006 Type R2 standards. It has male national pipe taper npt threads on one end and female NPT threads on the other for connecting to a female and a male threaded pipe or fitting. Sherwood 18016, she18016.

#ad



Banjo HB150/125-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1-1/2" NPT Male x 1-1/4" Barbed

#ad
Banjo Corporation #ad - All kits contain: bulkhead fitting, gasket, lock nut. Hi-flow hose. Sherwood 18016, she18016. Hose fittings are used in systems such as air compressors, road construction, automatic manufacturing operations, mining, firefighting, aircraft controls, and tire installation in industries including agriculture, and aviation.

Banjo manufactures valves, pipe and hose fittings, pumps, couplings, and other fluid handling products for industrial applications. Comes with 4 ft. Handles pressures up to 150 psi at 70 degrees F. The maximum working pressure for this fitting is 150 pounds per square inch psi at 70 degrees F. Precision molded in sterilizable polypropylene for dimensional stability and reinforced with fiberglass for added durability, strength, and chemical resistance.

Banjo HB150/125-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1-1/2" NPT Male x 1-1/4" Barbed #ad - 90-degree elbow for connecting tubing to a threaded connection at an angle. Maximum working pressure of 150 psi at 70 degrees F. Glass-reinforced polypropylene for rigidity, and resistance to heat, dimensional stability, corrosion, most chemicals, lightweight, and high impact. Integral hex nut for using a wrench to tighten the fitting.

The company, is headquartered in Crawfordsville, founded in 1995, IN. Designed to give excellent service for: straight pipe connector Less than 4 x I.

#ad



Ancor 131310 Marine Grade Electrical Duplex Tinned Boat Cable - 12 AWG, Triplex, Flat Cable, Black/Green/White, 100 Feet

#ad
Ancor 131310 #ad - Double the ozone resistance required by the SAEJ2006. The hose meets sae J2006 Type R2 standards. All kits contain: bulkhead fitting, gasket, lock nut. Maximum working pressure of 150 psi at 70 degrees F. Precision molded in sterilizable polypropylene for dimensional stability and reinforced with fiberglass for added durability, strength, and chemical resistance.

Schedule 80 polypropylene for a thicker wall than schedule 40 Designed to give excellent service for: straight pipe connector Less than 4 x I. Stock color is jet black to match acrylic tank backgrounds. Heavy wall bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium.

Ancor 131310 Marine Grade Electrical Duplex Tinned Boat Cable - 12 AWG, Triplex, Flat Cable, Black/Green/White, 100 Feet #ad - Product can give good service with proper installation, may not be suitable in all Applications: Severe Bend. This product is easy to use and easy to install. Fits standard 2" x 3" residential downspouts. Fits pipe and hose. Male npt threads on one end and female NPT threads on the other for connecting pipes with different ends.

Requires a 2-1/4" hole in bulkhead. Comes with 4 ft.

#ad