A separate valve and fittings can easily cost you an additional $25-35! Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps! Stainless steel head rotates 360 degrees to fit in virtually any installation. Riptide is the very first pump designed specifically for homebrewing!

Blichmann Engineering Riptide Pump. They also use noisy open motors that must be shielded from liquids. Large stable base with protective rubber feet keeps the pump from tipping - a $25 retail value included! Convenient power switch on the base Includes a 10ft long cord with plug 120V Base acts as a cord wrap for convenient storage Assembled in USA from USA and imported components.

Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. All undesireable attributes for a homebrewing pump! the team of homebrewers at blichmann engineering and our friends at march manufacturing have created the RipTide to solve all of these problems! High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of lift! Tri-clamp head connection fully disassembles in seconds for easy cleaning 1/2" NPT inlet and outlet connections Totally enclosed motor is splash proof and super quiet 50 dB Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings.

These pumps are cumbersome to disassemble, a switch, difficult to prime to get the wort moving, require the addition of a valve, and a proper base to hold the pump upright.

Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing - 10 ft.

Precut 1/2 inch. Feature: 10 ft. High temp tubing. Precut 1/2 inch iD silicone tubing - 10 ft. Precut 1/2 inch id silicone tubing, feature: 10 ft. High Temp tubing. Precut 1/2 inch iD silicone tubing - 10 ft. Country of origin - united States, manufacturer name - Midwest home brewing and winemaking supplies.

1/2" FPT TO 1/2" BARB - Stainless Steel

Plastic construction. Feature: 10 ft. High temp tubing. If you are not using a qd set or a ball Valve, this is a handy piece of Stainless for a direct connection. 1/2" fpt on one side, with a 1/2" barb on the other. Precut 1/2 inch. Works with 1/2 inch. Use this fitting for connecting tubing directly to your pump. 1/2fpt on one side, with a 1/2Barb on the other.

.

DERNORD Sanitary Female Threaded Pipe Fitting to 1.5 Inch TRI CLAMP OD 50.5mm Ferrule Pipe Size: 1/2" NPT

Pipe size: 1/2" NPT Thread. Suitable for use in food, beverage, and dairy applications. 1/2fpt on one side, with a 1/2Barb on the other. Two fittings are clamped together with a high temp silicone gasket in between. The dernord sanitary female threaded Pipe Fitting to Tri Clamp Clover Sanitary hose connections just like the professional breweries use.

Feature: 10 ft. High temp tubing. Works with 1/2 inch. Precut 1/2 inch. Plastic construction. Two fittings are clamped together with a high temp silicone gasket in between, hoses, providing a clean efficient connection for valves, etc. Made of stainless steel 304 for resistance to corrosion and high temperatures.

Ferrule size: 505mm, and fits 1. 5" tri-clamp.

White SiliconeTubing, 1/2"ID, 3/4"OD, 1/8"Wall, 10' Length

Precut 1/2 inch. Applications for plastic tubing include blood and fluid handling, and food and beverage handling, peristaltic pumps, electrical and thermal insulation, analytical systems, among others. This white tubing meets National Sanitation Foundation NSF-51 standards for food equipment material. Silicone is resistant to ozone, non-petroleum brake fluid, hydraulic fluids that resist fire, engine and transmission oil, detergent, weather, salt water, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons.

Ferrule size: 505mm, and fits 1. 5" tri-clamp. Pipe size: 1/2" NPT Thread. Plastic construction. The clarity of plastic tubing may be transparent clear, or opaque solid, translucent semi-clear, and the tubing's coloring may indicate suitable applications. Plastic tubing is used in a wide variety of industries, automotive, laboratory, such as agriculture, and medicine.

Meets nsf-51 standards for food equipment material. Two fittings are clamped together with a high temp silicone gasket in between. It has a shore a hardness rating of 50 for flexibility, and it is translucent for visual inspection of fluids. This soft, tasteless, water, flexible tubing is odorless, food, and inert and is suitable for air, and beverage applications.

DERNORD 1.5" Tri Clamp to 0.5" Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting 1/2 Inch Barb Hose

Suitable for use in food, beverage, and dairy applications. Flexible tubing for air, food, water, and beverage. Silicone rubber for resistance to high temperatures, detergents, ozone, oils, and salt water. Translucent for visual inspection of fluids. Pipe size: 1/2" NPT Thread. Plastic construction. Features this dernord series sanitary rubber hose adapter is made of type stainless steel 304 and connects two rubber hoses.

Adapter for connecting pipes or fittings of different types. 1/2fpt on one side, with a 1/2Barb on the other. Operating temperature range of -150 to +500 degrees F. Ferrule size: 505mm, and fits 1. 5" tri-clamp. It has a barbed end to create a tight seal on the inside diameter ID of a hose when used with a clamp not included and an end to connect to the outside diameter OD of a hose on the other.

Feature: 10 ft. High temp tubing. Works with 1/2 inch. Made of stainless steel 304 for resistance to corrosion and high temperatures. Connects to a hose on both ends.

Concord 304 Stainless Steel 1/2" Barb to 1/2" Female FPT Fitting. Great for Home Brewing 2

Made of stainless steel 304 for resistance to corrosion and high temperatures. Pipe size: 1/2" NPT Thread. Works on all 1/2" Fittings. Operating temperature range of -150 to +500 degrees F. For use with rubber hoses: barb: 1/2" Barb For Rubber, Plastic, TPU, or other hose. Fits: 1. 5" tri clamp / Clover / Sanitary Fitting.

Feature: 10 ft. High temp tubing. 1/2" barb hose to 1/2" FPT. Two fittings are clamped together with a high temp silicone gasket in between. Ferrule size: 505mm, and fits 1. 5" tri-clamp. Connects to pipe with 1/2" ID. 1/2" barb hose to 1/2" fpt Fitting Precut 1/2 inch. 1/2fpt on one side, with a 1/2Barb on the other.

. Barbed fitting for a tight seal on hoses when used with a hose clamp not included. Works with 1/2 inch. Cast 304 stainless Steel Fitting. Great for home brewing.

HODEE 20 PCS Sanitary triCLAMP Tri CLAMP Silicone Gasket 1.5" （1.5 inch）OD: 50.5mm, ID: 35.1mm Dairy Brewing TRI Clove

Connects to a hose on both ends. Works on all 1/2" Fittings. Connects to pipe with 1/2" ID. Works with 1/2 inch. Suitable for use in food, beverage, and dairy applications. Flexible tubing for air, water, food, and beverage. Silicone rubber for resistance to high temperatures, oils, ozone, detergents, and salt water.

Translucent for visual inspection of fluids. Temperature: 0°C to 130°C. Feature: 10 ft. High temp tubing. Adapter for connecting pipes or fittings of different types. Operating temperature range of -150 to +500 degrees F. Specification： Packing Including:20 Pcs 1. 5" silicone gasket material: silicon style : tri-clamp temperature: 0°c to 130°c Acid Alkali Resistance：NO Oil Resistance:NO Size: 3/4" :OD:50

5mm id:19. 0mm 1" :od:505mm id:22. 5mm 1-1/2" :od:505mm id:35. 1mm 2" :od:64mm id:47.

Five Star PBW Cleaner Powdered Brewery Wash, 4-Pound Jar

All products have been formulated to work on every type of brewing equipment, while also maintaining the integrity of the surface. Size : 1. 5". 4 lb jar. Great for home brewing. Style : Tri-Clamp. Precut 1/2 inch. Made of stainless steel 304 for resistance to corrosion and high temperatures. Use 1 - 2 ounces per gallon for cleaning.

Barbed fitting for a tight seal on hoses when used with a hose clamp not included. Works with 1/2 inch. Material :Silicon. Plastic construction. Ferrule size: 505mm, and fits 1. 5" tri-clamp. Two fittings are clamped together with a high temp silicone gasket in between. For use with rubber hoses: barb: 1/2" Barb For Rubber, Plastic, TPU, or other hose.

Fits: 1. 5" tri clamp / Clover / Sanitary Fitting. Operating temperature range of -150 to +500 degrees F. Quantity:201/2" barb hose to 1/2" FPT.

Concord 304 Stainless Steel Quick Disconnect Barb Hose with MPT Set. Home Brewing Mash Tun. 2 Pack Barb Female/MPT Male

2 pack. 1/2" barb hose to 1/2" FPT. Adapter for connecting pipes or fittings of different types. Feature: 10 ft. High temp tubing. Connects to a hose on both ends. Connects to pipe with 1/2" ID. Cast 304 stainless Steel Fitting. Built to last a lifetime. Great for home brewing. Quick disconnect fitting set allows for fast removal of tubing.

Barbed fitting for a tight seal on hoses when used with a hose clamp not included. Plastic construction. 4 lb jar. All parts made with solid 304 Stainless Steel. Works on all 1/2" Fittings. Material :Silicon. Meets nsf-51 standards for food equipment material. 2 pack precut 1/2 inch. Suitable for use in food, beverage, and dairy applications.

Flexible tubing for air, food, water, and beverage. Silicone rubber for resistance to high temperatures, oils, detergents, ozone, and salt water. Translucent for visual inspection of fluids.

CONCORD 304 Stainless Steel 1/2" Barb Hose to 1/2" NPT Home Brew Fitting. 2 Pack

Feature: 10 ft. High temp tubing. High Grade. Great for home brewing. Connects to pipe with 1/2" ID. Operating temperature range of -150 to +500 degrees F. 1/2fpt on one side, with a 1/2Barb on the other. Cast 304 stainless Steel Fitting. Powdered Brewery Wash. Works with 1/2 inch. Temperature: 0°C to 130°C. Made of stainless steel 304 for resistance to corrosion and high temperatures.

1/2" barb to 1/2" NPT fitting. Plastic construction. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal. Two fittings are clamped together with a high temp silicone gasket in between. Adapter for connecting pipes or fittings of different types.

You get 2 units per pack. Built to last a lifetime. Size : 1. 5". Parts disconnect in literally one second.