Blue Sea Systems Blue Sea 5502 Fuse Block Class T 225-400 Amp

Blue Sea Systems. Terminal stud size: 3/8"-16 m10 mounting holes: accept 1/4" m6 screw maximum cable size 4/0 AWG Fuse Mounting Blocks: Tin-Plated Copper Class T Fuses Available: 110-400 Amperes DC 5502. Fuse block class t 225-400 amppart #: 5502features:maximum voltage: 160 Volts DC Maximum Amperage: 400 Amperes DC Maximum Torque: 190 in-lb 21.

47 nm max.

Blue Sea Systems Class T Fuses

5117class t-fuse225aextremely fast short-circuit response20, 000 ampere Interrupt Capacity AICUL listed to standard 248-15DC Tested to UL standard 198L 5117. Blue Sea Systems.

Blue Sea Systems 300 Amp m-Series Battery Switches

Blue Sea Systems. 6005m-series mini battery switchsingle circuit on/offswitches a single battery to a single load groupmultiple switches can be used to manage several isolated circuits including cross connecting for emergency parallelingFeatures:Ignition protected - Safe for installation aboard gasoline powered boatsCase design allows surface, or rear panel mountingIsolating cover with snap-on sections protects rear contacts3/8-16 tin-plated copper studs for maximum conductivity and corrosion resistance, front panel, accepts 3/8 and M10 ring terminals7/8 22.

22mm stud length to accept multiple cable terminalsideal for marine or RV applicationsAll non-corrosive marine grade metalsMolded in durable reinforced polycarbonateTactile textures indicate knob position by feel onlyLabel with international ON/OFF legendsRemovable key or knob remains positively retainedICON label set included for circuit identification 5117.

Blue Sea Systems. 6005.

Blue Sea Systems HD-Series Heavy Duty Battery Switch

Accepts two 4/0 awg 95mm² battery cables. Blue Sea Systems. Blue Sea Systems. Ignition protected - safe for installation aboard gasoline powered boats. 6005. Hd-series battery switch selector with alternator field disconnectPN:3003500 Amperes Continuous Rating for large diesel engines500 Ampere Continuous RatingAccepts 4/0 battery cablesIgnition protected - safe for installation aboard gasoline powered boats.

870 22. 01mm stud length to accept 4 or more cable terminals1/2" m12 tin-plated copper studs for maximum conductivity and corrosion resistancemeets American Boat and Yacht Council ABYC requirements for battery switchesTactile textures indicate knob position by feel onlyCase design allows surface or rear panel mountingFits all Perko and Guest low amperage battery switch hole patternsSwitch Ratings: 10 Sec: 2750A60 Sec: 1150A5 Min: 700AContinuous: 500AMax Voltage: 32V DC 5117.

Continuous rating: 600A, Max Voltage: 32VDC. Switches a single battery to a single load group. Includes afD Alternator Field Disconnect. Ip66 waterproof, iso 8846 and meets ABYC requirements. Terminal stud Size: 1/2".

Blue Sea Systems 600A-1000A PowerBars

Accepts two 4/0 awg 95mm² battery cables. Switches a single battery to a single load group. Ignition protected - safe for installation aboard gasoline powered boats. Blue Sea Systems. 6005. Continuous rating: 600A, Max Voltage: 32VDC. Includes afD Alternator Field Disconnect. Ip66 waterproof, iso 8846 and meets ABYC requirements.

Terminal stud Size: 1/2". 5117. Blue Sea Systems.

Blue Sea Systems 350 Amp E-Series Battery Switches

Includes afD Alternator Field Disconnect. Ignition protected - safe for installation aboard gasoline powered boats. Terminal stud Size: 1/2". Ignition protected-safe for installation aboard gasoline powered boats. Simultaneously switches two isolated battery banks. Terminal stud size: 3/8" - 16. Ip66 waterproof, iso 8846 and meets ABYC requirements.

6005. Continuous rating: 600A, Max Voltage: 32VDC. Dual circuit. Ip66 waterproof, iso 8846 and meets ABYC requirements. Blue Sea Systems. Switches a single battery to a single load group. 9004ee-series battery switch single circuit on/off w/ alternator field disconnectincludes afd alternator field disconnectce marked Ignition protected - Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council ABYC requirements for battery switches 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals 7/8" 22.

22mm stud length to accept multiple cable terminals Tactile textures indicate knob position by feel only 5117. Continuous rating: 350A per circuit, Maximum voltage: 32V DC. Blue Sea Systems. Accepts two 4/0 awg 95mm² battery cables.

Magnum Energy ME & MS Series Battery Monitor Kit ME-BMK

Accepts two 4/0 awg 95mm² battery cables. 5117. Ignition protected - safe for installation aboard gasoline powered boats. Ip66 waterproof, iso 8846 and meets ABYC requirements. Includes module, cable & shunt. Continuous rating: 600A, Max Voltage: 32VDC. Simultaneously switches two isolated battery banks. Dual circuit.

Ip66 waterproof, iso 8846 and meets ABYC requirements. Continuous rating: 350A per circuit, Maximum voltage: 32V DC. Blue Sea Systems. Terminal stud size: 3/8" - 16. Ignition protected-safe for installation aboard gasoline powered boats. Battery monitor kit, voltage, mfg# me-bmk, monitors the battery bank & reports the state of charge, amp-hours in/out, Amps, provides a fuel gauge style meter for your battery bank, and the minimum/maximum DC Volts.

. 6005. Switches a single battery to a single load group. Terminal stud Size: 1/2". Manufactured to the highest quality available. With true enhanced performance.

Blue Sea Systems Common BusBars 100A-250A

Continuous rating: 350A per circuit, Maximum voltage: 32V DC. 6005. Switches a single battery to a single load group. Ignition protected - safe for installation aboard gasoline powered boats. Ip66 waterproof, iso 8846 and meets ABYC requirements. Ignition protected-safe for installation aboard gasoline powered boats.

Ip66 waterproof, iso 8846 and meets ABYC requirements. Blue Sea Systems. Dual circuit. Includes afD Alternator Field Disconnect. Continuous rating: 600A, Max Voltage: 32VDC. 5117. Blue Sea Systems. Accepts two 4/0 awg 95mm² battery cables. Manufactured to the highest quality available. With true enhanced performance. Latest technical Development.

Terminal stud Size: 1/2". Terminal stud size: 3/8" - 16. Simultaneously switches two isolated battery banks.

Blue Sea Systems 187 Series, 285 Series & Klixon Circuit Breakers

Simultaneously switches two isolated battery banks. Ignition protected-safe for installation aboard gasoline powered boats. Accepts two 4/0 awg 95mm² battery cables. Terminal stud Size: 1/2". 5117. Includes afD Alternator Field Disconnect. Ip66 waterproof, iso 8846 and meets ABYC requirements. Dual circuit. 6005. Ignition protected - safe for installation aboard gasoline powered boats.

Blue Sea Systems. Continuous rating: 600A, Max Voltage: 32VDC. Switches a single battery to a single load group. Manufactured to the highest quality available. With true enhanced performance. Latest technical Development. Terminal stud size: 3/8" - 16. Continuous rating: 350A per circuit, Maximum voltage: 32V DC. Ip66 waterproof, iso 8846 and meets ABYC requirements.

Blue Sea Systems.

SELTERM UL Listed Marine Grade Tinned Copper Wire Lugs Heavy Duty Battery Cable Ends Eyelets Ring Terminal Connectors

The battery Cable lugs meet S. A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V. Close end pad seals Out Moisture Keeping Cables Dry. Made from 100% annealed Tinned Copper for Max Current Flow. Switches a single battery to a single load group. Dual circuit. Blue Sea Systems. 5117.

Terminal stud size: 3/8" - 16. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product. Blue Sea Systems. Ip66 waterproof, iso 8846 and meets ABYC requirements. Simultaneously switches two isolated battery banks. Terminal stud Size: 1/2". Ip66 waterproof, iso 8846 and meets ABYC requirements.

Accepts two 4/0 awg 95mm² battery cables. Includes afD Alternator Field Disconnect. Continuous rating: 600A, Max Voltage: 32VDC. Ignition protected-safe for installation aboard gasoline powered boats. Ul tested & Approved.

TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED

Upon cooling, non-drying, forming a permanent, the adhesive solidifies, flexible and water resistant barrier. Dual circuit. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Can be Crimped or Soldered. Terminal stud size: 3/8" - 16. Includes afD Alternator Field Disconnect. Accepts two 4/0 awg 95mm² battery cables.

Blue Sea Systems. Ip66 waterproof, iso 8846 and meets ABYC requirements. Ignition protected - safe for installation aboard gasoline powered boats. Made from 100% annealed Tinned Copper for Max Current Flow. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

Close end pad seals Out Moisture Keeping Cables Dry. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Manufactured to the highest quality available. With true enhanced performance. Latest technical Development. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

Ignition protected-safe for installation aboard gasoline powered boats.