GeeBat 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Heatsink Cooling Peltier 12V 5.8A
Specifications: model: TEC1-12706 Size: Approx. Fitted with 6-inch insulated leads. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts. These devices must be used in conjunction with a heat sink to avoid burned. Cooling power: Qcmax 58-65W. Fitted with 6-inch insulated leads.
Size: approx. 40mm x 40mm x 3. 8mm voltage: 12v umax v: 15v cooling power: Qcmax 58-65W Imax A: 5. 8a △tmaxqc=0: up to 65°c operates temperature: -30°c to 83°c power cord: 25-30cm package Included: 10* TEC1-12706 Thermoelectric Cooler Model: tec1-12706 Thermoelectric Cooler. 40mm x 40mm x 3. 8mm.
Thermal Adhesive Tape 30mm by 25M, HPFIX High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability
X1f947; thermally conductive tape has very strong adhesion and has good thermal conductivity. 40mm x 40mm x 3. 8mm. Size: approx. Package included: 1 roll thermal Conductive Double-sided Tape Model: tec1-12706 Thermoelectric Cooler. 2. After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers just a little strength.
Led、m/b、p/s 、heat sink 、lcd -tv 、notebook pc 、pc、telecom device、wireless hub ddr module 、 dvd applications 、 hand-set application features: ★ good adhesion Acrylic PSA ★ Very good thermal conductivity ★ Soft and compressibility ★ Easy to assemble ★ Long lifetime working : normal temperature80-120℃ can work for a minimum of 5 years Notes For Attention: 1.
When using thermal conductive double-sided tape, keep the adhesive surface clean and dry. Fitted with 6-inch insulated leads.
GENNEL 20g Silver Compound Thermal Conductive Grease Paste for CPU GPU Chipset Ovens Cooling
BAY Direct 5-Pack Reusable Thermal Paste 7 Oz/200g, Large Syringe Thermal Grease Cool Compound Heatsink Apply to PC/CPU/GPU/LED/VGA Accessory Included
Appy to cpu, led, vga, chipset and other PC components.
diymore 10pcs TEC1-12706 12V 60W 6A 40MMX40MM Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
Rated voltage: dc12v vmax: 15V; Starting Current 5. 8 a. Operation temperature: -30°C-70°C. Size: 40mm x 40mm x 3. 6mm. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. Fitted with 6-inch insulated leads. Cooling power: Qcmax 58-65W. Package included: 10x tec1-12706 heatsink thermoelectric Cooler Cooling Peltier Plate Module Model: tec1-12706 Thermoelectric Cooler.
If combined with thermal paste, the effect will be better. X1f947; hpfix thermal tape has thermal conductivity 1. 5 w/m-k to meet most of electronics heat dissipation demands. X1f947; thermal tape is widely used for high power led, ssd drives, ddr memory Modules, High power power supply, motor controller, MOS tube, automotive electronic heating module, power semiconductor, video card ram, GBT chip, GPU, computer cUP, communication equipment, new energy heating power.
X1f947; thermal tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature 80-120°C.
Thermal Double Sided Adhesive Tape 40mm by 25M, HPFIX High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability
When using thermal conductive double-sided tape, keep the adhesive surface clean and dry. 3. The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours to achieve the maximum adhesive strength. 40mm x 40mm x 3. 8mm.
Thermal conductivity: >3. 17w/m-k thermal Resistance:. Operates temperature: -30°C to 83°C. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time. 4. In the paste process, will greatly contribute to the effective increase in the area of adhesive, the appropriate heating 60 ~ 70 ℃, and as soon as possible to achieve maximum adhesion.
Size: approx.
Easycargo 10gram Thermal Conductive Glue Kit, High Performance Silicone Thermal Plaster Adhesive Glue for Interface Heatsink with LED IC Chips Transistor
40mm x 40mm x 3. 8mm. Fitted with 6-inch insulated leads. Thermal impedance: < 006. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better. X1f947; hpfix thermal tape has thermal conductivity 1. 5 w/m-k to meet most of electronics heat dissipation demands.
X1f947; thermal tape is widely used for high power led, automotive electronic heating module, GBT chip, motor controller, High power power supply, DDR Memory Modules, computer cUP, MOS tube, video card ram, power semiconductor, communication equipment, GPU, ssd drives, new energy heating power. X1f947; thermal tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature 80-120°C.
Gennel g107. Thermal conductivity: >3. 17w/m-k thermal Resistance: 0
GENNEL 75g Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound for LED GPU Chipset MOSFET Heatsink
Net weight: 75gram. 100% new Heatsink plaster. Application: apply to all heatsink no fixed clip thermal paste. Idea for mosfet heatsink，vGA CARD Northbridge Southbridge Heatsink. Thermal impedance: < 006.
TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick2.5mm Width, 1.5m Length, Solder Remover Kit for Desoldering
Alloy braided solder wick】 precision weaving solder braid with the size 2. 5mm width, it could help clean the spare solder on the pin away to avoid short circuit, 1. 5m length, especially in small, hard to reach areas. Durable desoldering iron tool】 the body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
A must-have solder removal kit】 the solder sucker can be used for broad place, all together can be used to correct mistakes with small boards on PCBs, which the solder wick can be used for small, hard to reach areas, remove relays and other components from printed circuit boards. Thermal impedance: < 0
06. How to use the solder wick ◆step 1: place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick; ◆Step 2: Remove the wick once the solder has been absorbed; ◆Step 3: Cut off the used part of the wick; ◆Step 4: Repeat this process if needed. X1f947; hpfix thermal adhesive tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
GENNEL 100gram White Thermal Grease Silicone Compound Paste for PC CPU Heatsink LED Chip Cooling
Alloy braided solder wick】 precision weaving solder braid with the size 2. 5mm width, it could help clean the spare solder on the pin away to avoid short circuit, 1. 5m length, especially in small, hard to reach areas. Durable desoldering iron tool】 the body of desoldering pump is made of aluminum, corrosion and have good heat dispersion, which can resistance to beat, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
A must-have solder removal kit】 the solder sucker can be used for broad place, all together can be used to correct mistakes with small boards on PCBs, hard to reach areas, which the solder wick can be used for small, remove relays and other components from printed circuit boards. Thermal conductivity: 1.
63w/m-K. Helps disperse the heat from CPU to heatsink effectively. 100% new. Suitable for: CPU heatsink or chip.