For a good balance of price and performance, cnc-machined flanges, Invidia offers the motorsports enthusiasts a strong line-up of Invidia N1 Exhaust is constructed with high-quality SUS304 stainless steel, and manufactured with a polished finish. These exhausts are engineered to produce strong mid to top-end power gains, as well as an increase in horsepower and torque.

Subaru br-z 2012-Up. Piping diameter: 60 millimeter. Tip size: 101 millimeter. Each system features mandrel-bent stainless steel piping for maximum exhaust flow and reduced back pressure.

Invidia HS12SSTFPP Front Pipe for Subaru BR-Z/Scion FR-S

2012-up subaru br-z and scion FR-S Front Pipe. 2012-up subaru br-z and scion FR-S FRONT Pipe. Piping diameter: 60 millimeter. 60 millimeter pipe diameter.

Invidia HS12SSTOPP Exhaust Over-Pipe for Subaru BRZ / Scion FR-S

Piping diameter: 60 millimeter. Constructed of polished SUS304 stainless steel. The combination of these features provides the excellent fit and finish demanding FR-S and BRZ owners expect. This over-pipe increases vehicle performance by reducing back pressure and creating smooth transitions for the exhaust gasses.

. This over-pipe is constructed of polished SUS304 stainless steel and features 60 millimeter mandrel bent piping and CNC machined cast flanges. This over-pipe from invidia fits the 2013 Scion FR-S and Subaru BRZ. 2012-up subaru br-z and scion FR-S Front Pipe. Fits 2012-up subaru brZ and Scion FR-S. Piping size: 60 millimeter 2.

36 inches.

K&N engine air filter, washable and reusable: 2005-2019 Toyota/Subaru/Scion H4 2.0 L 86, Gt 86, BRZ, FR-S 33-2300

See applicable instruction sheet for details. Piping size: 60 millimeter 2. 36 inches. Designed to boost horsepower and rate of acceleration. K&n's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box.

We make over 1, 200 different replacement air filters for virtually every vehicle on the road. Works with original equipment manufacturer vehicle electronics. 2012-up subaru br-z and scion FR-S Front Pipe. Piping diameter: 60 millimeter. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.

Lasts up to 50, 000 miles before cleaning is required depending on driving conditions. High air flow with exceptional filtration. Fits 2012-up subaru brZ and Scion FR-S. Can be cleaned and used again. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N.

Tomei Expreme Unequal Length Exhaust Manifold for Ft86 Gt86 Frs Fr-s Brz

Constructed of polished SUS304 stainless steel. You will not regret the pure sensational feeling that this manifold has to offer, an absolutely different dimension from unimpressive competition manifolds. 2012-up subaru br-z and scion FR-S Front Pipe. Can be cleaned and used again. The performance curve proves that this is the absolute best performance possible from any manifold.

Designed to boost horsepower and rate of acceleration. Fits 2012-up subaru brZ and Scion FR-S. The tomei expreme exhaust manifold has been developed to deliver "absolute power" improvement through its efficiency. Lasts up to 50, 000 miles before cleaning is required depending on driving conditions. Designed for optimum operating efficiency Bolts, Gaskets and Heat Wrap are all included Extreme heat resistant.

Piping size: 60 millimeter 2. 36 inches. Features designed to minimize exhaust resistance super lightweight & perfect flange SUS304 stainless steel pipes High performance achieved through the entire RPM range Improved efficient engine response Superb sound quality Overall lighter in weight in comparison with the factory genuine product.

Part number: 412003. Works with original equipment manufacturer vehicle electronics. Piping diameter: 60 millimeter.

Injen Technology SP1230P Air Intake System

High air flow with exceptional filtration. 2013-14 fr-s 2. 0l 4 cyl. Piping size: 60 millimeter 2. 36 inches. Constructed of polished SUS304 stainless steel. Can be cleaned and used again. 2012-up subaru br-z and scion FR-S Front Pipe. Piping diameter: 60 millimeter. Compatible filter #: X-1021. Designed to boost horsepower and rate of acceleration.

. Part number: 412003. Lasts up to 50, 000 miles before cleaning is required depending on driving conditions. For off-road use only tuned air intake w/ mr, Air horns, Air Fusion, enclosed air box, dry filter. Works with original equipment manufacturer vehicle electronics. Fits 2012-up subaru brZ and Scion FR-S.

.

Custom Fit Cup, Door, Console Liner Accessories Kit for BRZ 86 FR-S 2019 2018 2017 2016 2015 2014 2013 Subaru Toyota Scion 9 PC Set Red Trim

Works with original equipment manufacturer vehicle electronics. Can be cleaned and used again. Part number: 412003. No cutting or mods required. Protects resale value: the custom fit liners are like miniature rubber "floor mats" that cover all the pockets of your car including: cup holders, scratches, melted candy, crumbs, door pockets, and center console arm rest.

To install simply clean the pocket then drop the custom fit liner in the corresponding pocket. Piping size: 60 millimeter 2. 36 inches. They provide protection from spills, and rattling coins. Guaranteed fit: they fit all trim levels of the 2013 2014 2015 2016 2017 2018 2019 of the toyota 86, trd, Limited, Sport Tech, subaru BRZ and Scion FR-S: Including the following trim levels: Base, Premium, gt, Ts, and all Special Editions.

Premium material: made from a durable highly flexible rubber that allows the liners to flex and contour to the cars pockets and provide a non slip surface for items such as your phone to rest on. Lifetime warranty: includes a hassle free lifetime guarantee so that you will be protected for the lifetime of your car.

If you have any issues or are not 100% satisfied with your purchase please contact Cup Holder Hero and we will refund or replace. By purchasing cup holder heros® you'll add a cool splash of color to your interior and make cleaning your new 86, BRZ or FR-S a breeze! If you spill or get crumbs in any compartment simply remove the liner and wash them in the sink! This is one kit of 9 custom fit mats for your new car! Install Instructions: Eco friendly digital installation location map can be found on the product page and on a small sticker on the product packaging.

Designed to boost horsepower and rate of acceleration.

Lisle 38350 Exhaust Hanger Removal Pliers

Can be cleaned and used again. Constructed of polished SUS304 stainless steel. Compatible filter #: X-1021. 2012-up subaru br-z and scion FR-S Front Pipe. High air flow with exceptional filtration. Splash of color: four color options allow you to easily add a cool splash of color to your Subaru BR-Z, Toyota 86 or Scion FR-S.

The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier. This tool separates the rubber supports from exhaust hanger brackets. Piping size: 60 millimeter 2. 36 inches. Piping diameter: 60 millimeter. Lasts up to 50, 000 miles before cleaning is required depending on driving conditions.

Fits 2012-up subaru brZ and Scion FR-S. Part number: 412003. No cutting or mods required. Protects resale value: the custom fit liners are like miniature rubber "floor mats" that cover all the pockets of your car including: cup holders, scratches, door pockets, melted candy, crumbs, and center console arm rest.

Designed to boost horsepower and rate of acceleration. The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

Rear Window Louver Matte Black Window Visor Sun Shade Cover Vent ABS Windshield Cover for 2012-2018 Subaru BRZ/Scion FR-S/Toyota GT86

Can be cleaned and used again. Color: matte black fitment: custom fit 2012-2018 subaru BRZ / Scion FR-S / Toyota GT86 Feature: 1. No visibility issue, as the louver has open angle design. If you have any issues or are not 100% satisfied with your purchase please contact Cup Holder Hero and we will refund or replace.

This tool separates the rubber supports from exhaust hanger brackets. The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. Convenient for cleaning: giving your car classic appearance and providing it with convenient lift off design so that the louvers can be easily removed for routine cleaning of your rear window, making cleaning the window a quick and easy job! Package included: A Piece of Rear Window Louvers Self-adhesive 3M tape and installation accessories ♥Warm prompt: You had better wait at least 24 hours to make sure that the Window Louvers completely stick to your car before driving.

Lasts up to 50, 000 miles before cleaning is required depending on driving conditions. Designed to boost horsepower and rate of acceleration. Premium support & 18 months Warranty. Constructed of polished SUS304 stainless steel.

iJDMTOY Smoked Lens Full LED Rear Fog Light Kit Rear Fog, Brake, Reverse Features For 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ, 2017-up Toyota 86

Fit 2013-16 scion fr-s, 2013-up subaru BRZ and 17-up Toyota 86. If you have any issues or are not 100% satisfied with your purchase please contact Cup Holder Hero and we will refund or replace. This tool separates the rubber supports from exhaust hanger brackets. The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier. The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. Piping diameter: 60 millimeter. Designed to boost horsepower and rate of acceleration.

Compatible filter #: X-1021. Works with original equipment manufacturer vehicle electronics. Simple installation and cleaning: easy to install with self-adhesive 3M tape and installation accessories, fit quite tight and nice, no drilling or cutting; Convenient Lift-off Design makes it easy to remove the rear louvers for routine cleaning.

To install simply clean the pocket then drop the custom fit liner in the corresponding pocket. Premium support & 18 months Warranty. Piping size: 60 millimeter 2. 36 inches.

Spec-D Tuning LHP-FRS12JM-TM Scion FR-S Toyota 86 Black Projector Headlights+LED DRL+Signal Strip

Splash of color: four color options allow you to easily add a cool splash of color to your Subaru BR-Z, Toyota 86 or Scion FR-S. Made by oem approved & iso certified manufacturers in materials that meet or exceed strict OEM requirements. Can be cleaned and used again. Works with original equipment manufacturer vehicle electronics.

Compatible filter #: X-1021. H1 12v/55w light bulbs included for HIGH/LOW beam. They provide protection from spills, and rattling coins. Guaranteed fit: they fit all trim levels of the 2013 2014 2015 2016 2017 2018 2019 of the toyota 86, trd, gt, Ts, Limited, Sport Tech, Premium, subaru BRZ and Scion FR-S: Including the following trim levels: Base, and all Special Editions.

Premium material: made from a durable highly flexible rubber that allows the liners to flex and contour to the cars pockets and provide a non slip surface for items such as your phone to rest on. Lifetime warranty: includes a hassle free lifetime guarantee so that you will be protected for the lifetime of your car.

Smoked lens with red fiber optics V-shape LED tube for tail lamp. High quality black housing clear lens projector headlights w/ LED DRL strip & amber LED signal. 12-16 toyota 86 models only. Part number: 412003.