Mayhew Select 45049 Cats Paw Belt Removal Tool

#ad
Mayhew 45049 #ad - Highest quality chrome vanadium steel. Insert the tool between glass and door, engage molding clips with tool blade, and pull up to release each clip and remove molding. Works effectively with most clips, fasteners and molding assemblies. The cats paw belt removal tool works effectively with most clips, fasteners and molding assemblies, foreign and domestic.

It features chrome vanadium steel. Striking cap on end for extra tough jobs. Removes window Belt Moldings, foreign and domestic. Two composite soft-grip handle.

#ad



Lisle 35150 Window Belt Molding Remover

#ad
Lisle 35150 #ad - When the tool channel is below the belt molding, push or pull the tool upward. Slide the powder-coated tool downward between the window exterior and the door. Powder-coated for durability and ease of use against the glass. The channel side of the tool should face the door. Removes window belt moldings quickly.

The tool quickly removes the belt molding without damage to the window or the molding. Fits most domestic and import vehicles. Quickly removes all window belt moldings.

#ad



Lisle 35240 Belt Molding Tool Small

#ad
Lisle 35240 #ad - Removes window belt moldings quickly. Powder-coated for durability and ease of use against the glass. Unique flared head design and beveled edges allow the tool to be inserted under the molding at an angle. Quickly removes all window belt moldings. Makes removal of newer belt moldings easy. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door Tab.

For moldings with metal clips, hook the tool under each clip and pull up. Quickly removes belt molding without damage. Works on most domestic and import vehicles.

#ad



Steck Manufacturing 20015 Seam Buster Chisel

#ad
Steck Manufacturing 20015 #ad - Sharpened on two edges allowing for penetration between panels and the side edge allows for side impact to drive the panels apart without damage. Removes window belt moldings quickly. This heavy-duty chisel allows you to easily separate spot welds and can save up to 15 minutes per panel replacement. Steck manufacturing seambuster spot weld and bonded panel chisel is designed for quarter panels, rockers and any other pinchweld.

Makes removal of newer belt moldings easy. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door Tab. For moldings with metal clips, hook the tool under each clip and pull up. Quickly removes belt molding without damage. Works on most domestic and import vehicles. For quarter panels, rockers and any other pinchweld.

Steck Manufacturing 20015 Seam Buster Chisel #ad - Powder-coated for durability and ease of use against the glass. Quickly removes all window belt moldings. Cushioned handle absorbs shock. The sharp end allows for penetration between panels and the side edge allows for side impact to drive the panels apart without damage. Super tough alloy steel.

#ad



Steck Manufacturing 21720 Sure Grip Trim Clip Plier

#ad
Steck Manufacturing 21720 #ad - Quickly removes all window belt moldings. Works on trim pads, hood insulation, etc. Steck manufacturing sure grip trim clip pliers is designed not to break clips, works faster and easier than normal pliers. Cushioned handle absorbs shock. Lever action for faster, easier removal. Super tough alloy steel. Powder-coated for durability and ease of use against the glass.

Grips the stem of the clip, not the head, so clips don't break. Removes window belt moldings quickly. Makes removal of newer belt moldings easy. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door Tab. For moldings with metal clips, hook the tool under each clip and pull up.

Steck Manufacturing 21720 Sure Grip Trim Clip Plier #ad - Quickly removes belt molding without damage. Works on most domestic and import vehicles. For quarter panels, rockers and any other pinchweld. Sharpened on two edges allowing for penetration between panels and the side edge allows for side impact to drive the panels apart without damage.

#ad



Astro 3037 1/2-Inch x 18-Inch Air Belt Sander with Belts

#ad
Astro Pneumatic Tool Company 3037 #ad - There is also a non-slip handle grip for user comfort and variable speed control for all applications. Sharpened on two edges allowing for penetration between panels and the side edge allows for side impact to drive the panels apart without damage. Includes: 303740 -sanding belt 40 grit - 1/2" x 18" 303760 - sanding belt 60 grit - 1/2" x 18" 303780 - Sanding Belt 80 Grit - 1/2" x 18".

Powder-coated for durability and ease of use against the glass. Works on trim pads, hood insulation, etc. Great for Spot Weld Removal. Removes window belt moldings quickly. Lever action for faster, easier removal. Variable speed control and increased pulley space for new thicker belts. The astro pneumatic 3037 1/2" x 18" air Belt Sander is constructed with increased pulley space for the new thicker belts.

Astro 3037 1/2-Inch x 18-Inch Air Belt Sander with Belts #ad - Industry leading 05hp. Makes removal of newer belt moldings easy. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door Tab. For moldings with metal clips, hook the tool under each clip and pull up.

#ad



Lisle 45900 Hood Prop

#ad
Lisle 45900 #ad - Also great for body or repair work on door, trunk lids, or hatchbacks. Quickly removes all window belt moldings. The tool telescopes from 18 1/2" to 46 3/4". Variable speed control and increased pulley space for new thicker belts. The tool telescopes from 18 1/2" to 46 3/4". Super tough alloy steel. Grips the stem of the clip, not the head, so clips don't break.

. Removes window belt moldings quickly. The three-piece, telescoping design allows the mechanic to hold the hood in the desired position. Can be used from the side of car for better access to the engine compartment. Industry leading 05hp. Includes: 303740 -sanding belt 40 grit - 1/2" x 18" 303760 - sanding belt 60 grit - 1/2" x 18" 303780 - Sanding Belt 80 Grit - 1/2" x 18".

Lisle 45900 Hood Prop #ad - The three-piece, telescoping design allows the mechanic to hold the hood in the desired position. Powder-coated for durability and ease of use against the glass. Also great for body or repair work on door, trunk lids, or hatchbacks. Can be used from the side of car for better access to the engine compartment.

Works on trim pads, hood insulation, etc.

#ad



ALC Keysco 77175 Hustler Stick Alignment Bar

#ad
ALC Keysco 77175 #ad - Variable speed control and increased pulley space for new thicker belts. Powder-coated for durability and ease of use against the glass. Includes: 303740 -sanding belt 40 grit - 1/2" x 18" 303760 - sanding belt 60 grit - 1/2" x 18" 303780 - Sanding Belt 80 Grit - 1/2" x 18". Grips the stem of the clip, not the head, so clips don't break.

Made in U. S. A. Hustler stick alignment bar for bumpers, panels, hoods, decks and brackets. Lever action for faster, easier removal. Heavy duty 1-1/4" diameter tubing with two welded hooks for strength and versatility. Makes removal of newer belt moldings easy. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door Tab.

ALC Keysco 77175 Hustler Stick Alignment Bar #ad - For moldings with metal clips, hook the tool under each clip and pull up. Quickly removes belt molding without damage. Works on most domestic and import vehicles. For quarter panels, rockers and any other pinchweld. Indispensable when versatility of a chain hookup is needed. Sold Individually.

#ad



Steck Manufacturing 21730 Easy Pry

#ad
Steck Manufacturing 21730 #ad - The tool telescopes from 18 1/2" to 46 3/4". Industry leading 05hp. Remove bezels, moldings, trim and panels easily. Works on trim pads, hood insulation, etc. Great for Spot Weld Removal. Sold Individually. Quickly removes all window belt moldings. Lever action for faster, easier removal. Works on all Makes of Cars and Trucks.

Sharpened on two edges allowing for penetration between panels and the side edge allows for side impact to drive the panels apart without damage. Also great for body or repair work on door, trunk lids, or hatchbacks. Non-marring, won't scratch paint. Removes window belt moldings quickly. Cushioned handle absorbs shock.

Steck Manufacturing 21730 Easy Pry #ad - Simple belt tension lever. Grips the stem of the clip, not the head, so clips don't break. Makes removal of newer belt moldings easy. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door Tab. For moldings with metal clips, hook the tool under each clip and pull up. Quickly removes belt molding without damage.

#ad



Lisle 34920 Door Latch Release Tool

#ad
Lisle 34920 #ad - Lever action for faster, easier removal. Makes removal of newer belt moldings easy. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door Tab. For moldings with metal clips, hook the tool under each clip and pull up. Quickly removes belt molding without damage. Works on most domestic and import vehicles.

For quarter panels, rockers and any other pinchweld. Powder-coated for durability and ease of use against the glass. Also great for body or repair work on door, trunk lids, or hatchbacks. Grips the stem of the clip, not the head, so clips don't break. Includes: 303740 -sanding belt 40 grit - 1/2" x 18" 303760 - sanding belt 60 grit - 1/2" x 18" 303780 - Sanding Belt 80 Grit - 1/2" x 18".

Lisle 34920 Door Latch Release Tool #ad - The tool telescopes from 18 1/2" to 46 3/4". Works on all Makes of Cars and Trucks. Cushioned handle absorbs shock. Sharpened on two edges allowing for penetration between panels and the side edge allows for side impact to drive the panels apart without damage. Simple belt tension lever. Lever action for faster, easier removal.

#ad



Performance Tool W86561 Angled Push Pin Pliers for Retainer & Anchor for Honda, Toyota, GM, Ford, Chrysler

#ad
Performance Tool W86561 #ad - Variable speed control and increased pulley space for new thicker belts. Makes removal of newer belt moldings easy. For clip-less moldings, the tool is twisted or pulled back to release the molding from the door Tab. For moldings with metal clips, hook the tool under each clip and pull up. Quickly removes belt molding without damage.

Works on most domestic and import vehicles. For quarter panels, rockers and any other pinchweld. Fits common anchors on honda, Toyota, GM, Ford, Chrysler and many other makes. Lever action for faster, easier removal. Super tough alloy steel. Grips the stem of the clip not the head so clips don't break. Quickly and easily removes plastic anchors without damage.

Performance Tool W86561 Angled Push Pin Pliers for Retainer & Anchor for Honda, Toyota, GM, Ford, Chrysler #ad - The tool telescopes from 18 1/2" to 46 3/4". Works on all Makes of Cars and Trucks. The three-piece, telescoping design allows the mechanic to hold the hood in the desired position. Also great for body or repair work on door, trunk lids, or hatchbacks. Lever action for faster, easier removal. Sold Individually.

#ad