
With comprehensive tips and advice from masters of game call making, this guide will interest woodturners and outdoor enthusiasts alike. Chapters address every aspect of this American folk art, the right materials and tools, the proper methods of preparation, including the history of duck calls, and the best finishing techniques.
More than a woodturning project book. Readers also will find a gallery of work by noted game call makers, information on goose and deer calls, and a directory of resources for materials.
Learn to Turn, 3rd Edition Revised & Expanded: A Beginner's Guide to Woodturning Techniques and 12 Projects Fox Chapel Publishing Step-by-Step Instructions, Troubleshooting, Tips, & Expert Advice

This revised & expanded third edition also includes new and very attainable step-by-step projects, a special troubleshooting section that reveals surprisingly simple solutions to common turning mistakes, and an inspiring artist gallery of completed works. Discover how to select the lathe that's right for you, sanding, the basics of turning tools, and the fundamentals of sharpening, and finishing.
.
PSI Woodworking Products LCDOWEL Dowel Collet Chuck System

Pre threaded with 1" x 8 tpi headstock thread. Get precision gripping and centering of small diameter dowels and tenons. Get precision gripping and centering of small diameter dowels, bottle stoppers, tenons, spindles. Easily hand tightens to safely secure collet and work piece. Collet chuck body pre-threaded to 1" X 8TPI, 1 3/4" X 16TPI Lathe headstock spindle adapter.
. Ideal for gripping pen mandrels, bottle stoppers and other small projects where a tenon is used for chucking. Collet will 'snap' into position within the sleeve nut. Ideal for gripping pen mandrels, and other small woodturning projects where a Tenon is used for Chucking. 5 included er32 collets: 1/4", 1/2", 5/8", 3/8", 3/4".
Also includes Blow molded carrying case for easy storage.
The Art Of American Game Calls: Duck, Goose, Turkey & More: Identification & Values

After assembly, screw chuck on lathe spindle and tighten sleeve nut around work piece. Used book in Good Condition. In addition, mallardtone, herter's, Lohman, the book profiles the major American call companies like Faulk, and Olt. If you are hunting for the best book on American game calls, this is it. Easily hand tightens to safely secure collet and work piece.
Collet chuck body pre-threaded to 1" X 8TPI, 1 3/4" X 16TPI Lathe headstock spindle adapter. 5 included er32 collets: 1/4", 5/8", 3/8", 1/2", 3/4". Also includes Blow molded carrying case for easy storage. Ideal for gripping pen mandrels, and other small woodturning projects where a Tenon is used for Chucking.
Examples of famous call makers such as Perdew, Allen, and many others are included, as well as a wide sampling of calls from lesser known makers. Each call is identified as to maker, approximate age, area of manufacture, and current collector value.
PSI LCENTLT2 No. 2MT Heavy Duty Live Tailstock Center

It runs very true and is also well balanced and smooth for effective turning. 5 included er32 collets: 1/4", 1/2", 5/8", 3/8", 3/4". Also includes Blow molded carrying case for easy storage. Huge live center for heavy duty workpieces. 60-degree point. Ideal for gripping pen mandrels, and other small woodturning projects where a Tenon is used for Chucking.
Easily hand tightens to safely secure collet and work piece. Collet chuck body pre-threaded to 1" X 8TPI, 1 3/4" X 16TPI Lathe headstock spindle adapter. Get precision gripping and centering of small diameter dowels, bottle stoppers, tenons, spindles. Ideal to support your work at the tailstock end of your lathe.
Collet will 'snap' into position within the sleeve nut.
18 Pieces - Micro-Mesh 2" Assortment Pack

Ideal for gripping pen mandrels, and other small woodturning projects where a Tenon is used for Chucking. Cone is 2-1/2" by 1-11/16" overall diameter. Assortment pack contain 2 each:soft touch micro mesh pad 1500 grit soft touch micro mesh pad 1800 gritsoft touch micro mesh pad 2400 gritsoft touch micro mesh pad 3200 gritSoft Touch Micro Mesh Pad 3600 grit Soft Touch Micro Mesh Pad 4000 gritSoft Touch Micro Mesh Pad 6000 grit Soft Touch Micro Mesh Pad 8000 grit Soft Touch Micro Mesh Pad 12000 grit Get precision gripping and centering of small diameter dowels, bottle stoppers, tenons, spindles.
. Ball bearing precision; turns smoothly. 18 color coded foam backed abrasive pads - 2 each grit. Works great on surfaces that include stabilized woods, acrylics and solid surface materials. Remarkable hi-gloss, scratch free shine. Huge live center for heavy duty workpieces. Easily hand tightens to safely secure collet and work piece.
Hold Fast Non-Stick Bushings for CA Pen Finishing

18 color coded foam backed abrasive pads - 2 each grit. Ball bearing precision; turns smoothly. Ideal for gripping pen mandrels, and other small woodturning projects where a Tenon is used for Chucking. To use, remount the barrel onto your lathe, replace the bushings with the 60° cones, simply remove your turned pen barrel once you have performed your final sanding, and apply your CA finish.
After assembly, screw chuck on lathe spindle and tighten sleeve nut around work piece. Used book in Good Condition. Huge live center for heavy duty workpieces. 60-degree point. Make finishing easier. Collet will 'snap' into position within the sleeve nut. Material will not stick to pen barrels. Works great on surfaces that include stabilized woods, acrylics and solid surface materials.
A Legacy of Craftsmanship and Rich Hunting Tradition - Calling The Wild: The History of Arkansas Duck Calls

Ball bearing precision; turns smoothly. After assembly, screw chuck on lathe spindle and tighten sleeve nut around work piece. Used book in Good Condition. Cone is 2-1/2" by 1-11/16" overall diameter. Material will not stick to pen barrels. Huge live center for heavy duty workpieces. Large live lathe center. Easily hand tightens to safely secure collet and work piece.
Collet chuck body pre-threaded to 1" X 8TPI, 1 3/4" X 16TPI Lathe headstock spindle adapter. Ranging from 1500 to 12, 000 grit. Collet will 'snap' into position within the sleeve nut. Make finishing easier.
PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set

Large live lathe center. Premium long lasting HSS blades with beautifully turned and stained hardwood handles and brass ferrules. Ranging from 1500 to 12, 000 grit. Chisels are 10-inches in overall length with 4-inch blades. Comes in an attractive wooden display box. Comes in an attractive wooden display box Get precision gripping and centering of small diameter dowels, tenons, bottle stoppers, spindles.
Cone is 2-1/2" by 1-11/16" overall diameter. No more bushings glued to barrels. Ideal 5 piece wood lathe chisel set for small detailed turning projects on your mini lathe. Premium long lasting HSS blades with beautifully turned and stained hardwood handles and brass ferrules. Material will not stick to pen barrels.
Ideal for gripping pen mandrels, and other small woodturning projects where a Tenon is used for Chucking.
Duck Calls of Illinois, 1863-1963

. Includes:-1/4-inch roughing gouge, 3/32-inch parting tool, 1/8-inch spindle gouge, -1/4-inch round nose scraper, -1/4-inch skew chisel. Chisels are 10-inch in overall length, with 4-inch blades. Make finishing easier. Easily hand tightens to safely secure collet and work piece. Collet chuck body pre-threaded to 1" X 8TPI, 1 3/4" X 16TPI Lathe headstock spindle adapter.
Get precision gripping and centering of small diameter dowels, tenons, bottle stoppers, spindles. Ball bearing precision; turns smoothly. Fantastic buy for five essential chisels. Ranging from 1500 to 12, 000 grit. After assembly, screw chuck on lathe spindle and tighten sleeve nut around work piece. Used book in Good Condition.
The Pen Turner's Bible: The Art of Creating Custom Pens

After assembly, screw chuck on lathe spindle and tighten sleeve nut around work piece. Used book in Good Condition. Beginning with a simple yet very elegant ballpoint, the steps in its creation are explained in detail while subsequent chapters and projects add additional complexity and techniques. 18 color coded foam backed abrasive pads - 2 each grit.
With tutorials on both wood and metal lathes, this guide goes beyond step-by-step processes, encouraging wood turners to use their imaginations and adopt this classic art as their own. 5 included er32 collets: 1/4", 5/8", 1/2", 3/8", 3/4". Also includes Blow molded carrying case for easy storage. Cone is 2-1/2" by 1-11/16" overall diameter.
Includes:-1/4-inch roughing gouge, 1/8-inch spindle gouge, 3/32-inch parting tool, -1/4-inch round nose scraper, -1/4-inch skew chisel. Chisels are 10-inch in overall length, with 4-inch blades. Ball bearing precision; turns smoothly.